Woman in straw hat smiles, holding wine glass near a lake.

Keep Your Hose Connections Ready All Season

Outdoor spigot repair and installation in Muskegon that stops leaks and handles Michigan winters without cracking.

When your outdoor spigot leaks in Muskegon, water drips down the siding and pools near the foundation, creating conditions for rot, mold, and insect activity. You might notice the leak only when you attach a hose and turn the handle, or you may find a steady drip even when the valve is fully closed. Frost damage from Michigan winters often cracks the valve body or splits the pipe just inside the wall, and the problem does not show up until you turn the water back on in spring.

Ethical Pipe Solutions repairs leaking hose bibs by replacing damaged valve stems, packing washers, and handle assemblies, and we install frost-proof spigots that extend the shut-off point inside the heated part of your home. We check interior shut-off valves to confirm they close completely and hold pressure, and we seal exterior penetrations to prevent water from entering the wall cavity. If you need a new spigot for garden irrigation or pressure washing, we position it at a convenient height and ensure the supply line is properly supported to avoid stress on the connection.

If your outdoor spigot leaks or froze last winter in Muskegon, get in touch to schedule a repair or upgrade to a frost-proof model.

Why frost-proof spigots prevent damage you cannot see

We start by shutting off the interior valve and draining any remaining water from the line, then remove the old spigot and inspect the pipe for cracks or corrosion. In Muskegon, many older homes have short-shank hose bibs that leave water trapped in the exterior section of pipe, where it freezes and expands during cold snaps. We replace these with frost-proof models that have a long valve stem reaching six to twelve inches into the wall, placing the shut-off point in the warmer interior space where freezing is unlikely.

After installation, you will notice the handle turns smoothly without grinding or sticking, and the spigot delivers full water pressure without spraying from the packing nut or leaking at the wall plate. The new spigot automatically drains residual water from the valve body when you shut it off, so you do not need to blow out the line or wrap it in foam before winter.

We apply silicone caulk around the exterior flange to seal gaps between the spigot and siding, preventing rain and snowmelt from seeping into the wall. If your home has multiple outdoor water outlets, we can add a spigot near the garden or driveway to reduce the need for long hoses, but each installation requires running a new branch line from an existing cold water supply with proper pitch for drainage.

We hear these concerns from homeowners regularly

Before scheduling spigot work, most people want to know how to prevent freeze damage, whether a leaking spigot can cause interior problems, and how frost-proof models differ from standard hose bibs.

What is the difference between a frost-proof spigot and a regular one?
A frost-proof spigot has a long valve stem that shuts off water inside the heated part of your home, and it slopes downward so water drains out automatically when you close the valve. Regular hose bibs shut off water right at the exterior wall, where it can freeze and crack the valve body.
How do I know if my outdoor spigot is leaking inside the wall?
If you see water stains on the interior wall near the spigot, hear dripping sounds when the valve is closed, or notice a musty smell, water is likely escaping from a cracked pipe or loose connection inside the wall. We open the wall if needed to locate and repair the leak.
Why does my spigot leak only when I attach a hose?
The added weight and angle of the hose puts stress on the spigot body, and if the mounting screws are loose or the valve seat is worn, that pressure causes water to seep past the packing washer or drip from the spout. Tightening or replacing the internal components usually solves the issue.
When should I shut off outdoor spigots for the winter in Muskegon?
Close the interior shut-off valve and drain the exterior line before the first hard freeze, typically in late October or early November. If you have frost-proof spigots installed correctly, they drain themselves and only need the hose removed.
How high should an outdoor spigot be mounted?
Most spigots are installed twelve to eighteen inches above grade to keep the outlet above snow level and allow a bucket to fit underneath. We adjust height based on your siding type and how you plan to use the spigot.

Ethical Pipe Solutions repairs and installs outdoor spigots throughout Muskegon, with attention to freeze protection, proper drainage, and secure mounting that withstands hose attachment and removal. If your hose bib leaks or you want to add a new outdoor water source, contact us to schedule service and prevent freeze damage before next winter.